Revo Revo In-Car Manuel d'utilisateur télécharger pdf (Page 10)

TIP: Attach screws to

accessory bar for future use.

CAUTION: Ends of accessory bar are sharp!

REMOVE ACCESSORY BAR

RIGHT TRAY INSTALLATION

REMOVE LONG SCREWS

Using a Phillips screwdriver

remove both screws.

Using a Phillips

screwdriver, remove

3 long screws from

right tray.

ATTACH LONG SCREWS

Insert long screw through each hole in right tray,

main bar and into nut on underside of right tray.

Tighten  rmly with Phillips screwdriver.

POSITION TRAY

Position right tray on main

bar, lining up holes.

Using a Phillips screwdriver and an 8 mm

socket wrench, remove short screw and nut.

REMOVE SHORT SCREW AND NUT

Reach under left tray and

press nut into hole.

Reach under right tray and insert

short screw through right tray,

left tray and into nut.

ATTACH SHORT SCREW AND NUT Tighten  rmly with

Phillips screwdriver.

Children should not be

placed directly in the

BOB Stroller seat with the

Duallie ICSA installed,

unless tray is installed

directly in front of child for

safety and protection.

Warning

OMA18B P10

1 2 ... 5 6 7 8 9 10 11 12 13

Pas de commentaire

Revo Revo In-Car Manuel d'utilisateur Page 10